Motorola Moto G5 Plus Display Assembly Repair

Motorola Moto G5 Plus Display Assembly Repair Guide

Find high quality Motorola Moto G5 Plus replacement parts here.

Recommended Tools:

Nylon Spudger 
SIM Card Ejection Tool 
Fine Tip Curved Tweezers
Precision Knife Set
2mm Red Adhesive
Multi-Purpose Heat Gun
Phillips Screwdriver
Playing Cards

Step 1

Power down your Moto G5 Plus smartphone.
 
Step 2 (Motorola Moto G5 Plus SIM Card and MicroSD Card Tray)
 
Eject the SIM card and microSD Card Tray.
 
Step 3 (Motorola Moto G5 Plus Display Assembly)
 
The 5.5-inch Moto G5 Plus full HD display is glued on solidly. Apply heat to soften the adhesive.
 
With the precision knife carefully create separation and insert a playing card.
 
Slice through the sticky adhesive and carefully dislodge the Moto G5 Plus display from the rear case. Take your time and apply additional heat as needed
 
The display assembly is still connected to the phone by cables along the right side, so don’t try to remove it entirely just yet.
 
Remove the following 19 Phillips screws.
 
Use the tweezers to extract the midframe from the Motorola smartphone.
 
Peel up the piece of yellow tape and detach the battery connector from the motherboard.
 
Spudge up the fingerprint sensor connector and display cables to completely free the Moto G5 Plus screen.
 
Step 4 (Motorola Moto G5 Plus Fingerprint Reader)
 
Decouple the G5 Plus fingerprint reader from the front panel.
 
 
* To reassemble your device, follow the steps in reverse order.