Huawei Nexus 6P USB-C Board, Vibrator and Loudspeaker Repair

Huawei Nexus 6P USB-C Board, Vibrator and Loudspeaker Repair Guide

Find high quality, affordable Google Nexus 6P replacement screens and parts here.

Recommended Tools: 

Plastic Triangle Opening Tool
Nylon Spudger
SIM Card Ejection Tool
Fine Tip Curved Tweezers
Precision Knife Set
2mm Premium Red Adhesive
Multi-Purpose Heat Gun
Professional Phillips Screwdriver
Playing Cards

Step 1

Power down the Huawei Nexus 6P smartphone.
 
Step 2
 
Eject the Nexus 6P Nano SIM card tray.
 
Step 3
 
Apply heat to the plastic panel located at the bottom of Google phone.
 
Insert the precision knife underneath the plastic panel and create enough space to fit a playing card.
 
Work the playing card under the plastic panel and remove it from the Nexus 6P. Apply additional heat as needed.
 
Now turn your attention to the tight-fitting, glass panel at the top of the Google phone. Apply heat and then with the precision knife create enough space to fit a playing card.
 
Carefully slide a playing card under the glass panel and peel it off. Apply additional heat as needed.
 
With the fine tip curved tweezers remove the 2 tamper evident seals.
 
Remove the following 6 Phillips screws.
 
Use the precision knife to create space and insert a plastic triangle opening tool.
 
Use the triangle opening tool to release the clips and pop the Nexus 6P out of its rear enclosure.
 
Step 4

Remove the following Phillips screw and then the metal bracket. 

Disconnect and remove the daughterboard interconnect cable.
 
Detach the battery connector from the Nexus 6P motherboard.
 
Disconnect the signal cable from the USB-C daughterboard.
 
Remove the following Phillips screw securing the Nexus 6P USB-C board in place.
 
Use the spudger to pry up and remove the USB-C board from the Google phone.
 
Step 5
 
With the fine tip curved tweezers remove the vibrating motor.
 
Step 6
 
Remove the following Phillips screw.
 
Use the tweezers to peel up the spring contacts and remove the Nexus 6P loudspeaker from the phone.


To reassemble your device, follow the steps in reverse order.