Huawei Nexus 6P Front-Facing Camera and Headphone Jack Repair
Huawei Nexus 6P Front-Facing Camera and Headphone Jack Repair Guide
Find high quality, affordable Google Nexus 6P replacement screens and parts here.
Power down the Huawei Nexus 6P smartphone.
Eject the Nexus 6P Nano SIM card tray.
Apply heat to the plastic panel located at the bottom of Google phone.
Insert the precision knife underneath the plastic panel and create enough space to fit a playing card.
Work the playing card under the plastic panel and remove it from the Nexus 6P. Apply additional heat as needed.
Now turn your attention to the tight-fitting, glass panel at the top of the Google phone. Apply heat and then with the precision knife create enough space to fit a playing card.
Carefully slide a playing card under the glass panel and peel it off. Apply additional heat as needed.
With the fine tip curved tweezers remove the 2 tamper evident seals.
Remove the following 6 Phillips screws.
Use the precision knife to create space and insert a plastic triangle opening tool.
Use the triangle opening tool to release the clips and pop the Nexus 6P out of its rear enclosure.
Remove the following Phillips screw and then the metal bracket.
Detach the battery connector from the motherboard.
Disconnect the signal cable from the Nexus 6P motherboard.
Remove the following 2 Phillips screws.
Use the tweezers to remove the metal bracket protecting the Nexus 6P front-facing camera and headphone jack.
With the spudger detach the headphone jack from the motherboard and remove it from the Nexus 6P.
Disconnect and pull out the Huawei Nexus 6P 8-Megapixel front-facing selfie camera.
* To reassemble your device, follow the steps in reverse order.