LG V10 Teardown

LG V10 Teardown and Reassemble Guide

Find high quality, affordable LG V10 replacement screens and parts here.

Recommended Tools: 

Plastic Triangle Opening Tool
Nylon Spudger
Fine Tip Curved Tweezers
Professional Phillips Screwdriver

Step 1

Power down your LG V10 smartphone.
 
Step 2
 
Use the plastic triangle opening tool, or your fingernails, to work around the rear cover and release the plastic clips securing it in place.
 
Step 3
 
Remove the 3.85 V, 3000 mAh LG V10 battery
 
Step 4
 
Remove the following 14 Phillips screws securing the midframe in place.
 
Use the triangle opening tool to assist in removing the midframe from the LG V10 smartphone.
 
Step 5
 
Carefully separate the loudspeaker assembly from the midframe… no tools necessary!
 
Step 6
 
With the nylon spudger, disconnect the front-facing camera from the motherboard.
 
Remove the 5 MP LG V10 dual front-facing selfie camera.
 
Step 7
 
Disconnect the headphone jack from the motherboard and remove it from the chassis.
 
Step 8
 
Use the nylon spudger to detach the display assembly cable still keeping the motherboard in place.
 
With the cable detached, carefully pry up and remove the LG V10 motherboard.
 
Step 9
 
Disconnect and remove the LG V10 16 MP rear-facing camera from the motherboard.
 
Step 10
 
With the fine tip curved tweezers remove the IR blaster and proximity sensor.
 
Step 11
 
Remove the LG V10 vibrator.
 
Step 12
 
Use the fine tip curved tweezers to carefully remove the earpiece speaker.


To reassemble your device, follow the steps in reverse order.