LG Stylo 2 Screen Repair, Teardown and Reassemble

LG Stylo 2 Screen Repair, Teardown and Reassemble Guide

Find brand new, affordable LG Stylo 2 replacement screens and parts here.

Recommended Tools:

Plastic Triangle Opening Tool
Nylon Spudger
Fine Tip Curved Tweezers
Precision Knife Set
2mm Red Adhesive
Multi-Purpose Heat Gun
Professional Phillips Screwdriver
Playing Cards

Step 1 

Power down your LG Stylo 2 smartphone.
 
Step 2 (LG Stylo 2 S Pen Stylus)
 
Smoothly remove the LG Stylo 2 S Pen.
 
Step 3 (LG Stylo 2 Rear Battery Cover, Battery and Nano-SIM)
 
Easily remove the Stylo 2 rear battery cover. No tools necessary!
 
Extract the 3000 milliampere-hour (mAh) LG Stylo 2 battery.
 
Slide out the Nano-SIM card.
 
Step 4 (LG Stylo 2 Exterior Midframe)
 
Remove the following 11 Phillips screws.
 
Use the triangle opening tool to work around the LG phone and free the exterior midframe.
 
Step 5 (LG Stylo 2 Loudspeaker)
 
Eradicate the Stylo 2 loudspeaker from the midframe.
 
Step 6 (LG Stylo 2 Rear-Facing Camera and Front-Facing Camera)
 
Remove the 13-megapixel Stylo 2 rear-facing camera.
 
Spudge up the 5-megapixel LG Stylo 2 front-facing camera.
 
Step 7 (LG Stylo 2 Motherboard)
 
Disconnect the display cable and then lift out the Stylo 2 motherboard.
 
Step 8 (LG Stylo 2 Earpiece Speaker, Vibrator and Headphone Jack)
 
With the tweezers in hand, pluck out the Stylo 2 earpiece speaker, vibrator and headphone jack.
 
Step 9 (LG Stylo 2 Display Assembly)
 
Peel the display cable up from the midframe.
 
Begin to free the 5.7-inch Stylo 2 LCD assembly by using the heat gun to warm up the adhesive.
 
With the precision knife, carefully create separation and insert a playing card to start slicing through the adhesive securing the display to the interior midframe.
 
Take your time and apply additional heat as needed.
 
Once you have sliced through the adhesive, be mindful of the display cable when decoupling the LG Stylo 2 screen from the frame.
 
 
* To reassemble your device, follow the steps in reverse order.