iPad Pro 10.5" Front-Facing Camera Repair
10.5-inch iPad Pro Front-Facing Camera Repair Guide
Power down your 10.5-inch iPad Pro tablet.
Step 2 (iPad Pro 10.5 Display Assembly)
The fully laminated 10.5-inch iPad Pro Oxide TFT “True Tone” display assembly is glued on solidly and is a tight fit within the rear case. Apply heat to soften the adhesive.
Use the precision knife to create enough space to insert a triangle opening tool.
Use triangle opening tools to slice thru the strong adhesive and carefully decouple the iPad Pro screen. Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPad’s logic board.
Remove the following 2 Phillips screws securing the bracket that covers the display’s cables.
With the bracket out of the way, detach the cables from the logic board and free the 10.5-inch iPad Pro display assembly.
Step 3 (iPad Pro 10.5 Front Camera)
Remove the following 10 Phillips screws.
Extract the large shield covering the iPad ‘s logic board.
Spudge up the 7-megapixel iPad Pro “Facetime” camera. It is capable of 1080p video recording.
* To reassemble your device, follow the steps in reverse order.