Step 1
You will need the following tools for this take apart
A Small Phillips Screw Driver
A Case Opener Tool (Click Here to Purchase)
|
Step 2
Flip Over your Dell Axim X3 and remove the (4) rubber foot covers. |
Step 3
After removing the (4) rubber foot covers - unscrew the (4) screws in
each corner. |
Step 4
With the back side of the unit facing upwards use your shim tool to
loosen the cover tabs all around the unit. |
Step 5
Once all of your tabs are released the unit should open. |
Step 6
Remove the (3) screws as indicated by the circles |
Step 7
Remove all the ribbon connector cables... You will notice (2) of these
cables are shimmed into place by a small plastic connector tab. Be
careful in releasing these by securing both sides when applying the
release on each side. |
Step 8
Release the speaker wire connector. |
Step 9
Release the Antenna Connector. (comes off easily straight up).
Remove Antenna Piece from unit. |
Step 10
Release the Power connector tab located by the ribbon cable connectors. |
Step 11
You should now be able to release the mainboard from the unit.
|
Step 12
Now you can release the plastic tabs holding in your screen and remove
it and replace it with your new screen.
Work in reverse to re-assemble your unit. |
